Earth Vision AD2 Controller

 

Analog  RGB Controller for LCD Panels With Optional Integrated Touch Controller

 

 

The EarthVision/ADC2 is a VGA-XGA  input LCD controller. It allows (VGA) 640 x 480, (SVGA) 800 X 600, (XGA) 1024 X 768 active matrix TFT LCD's to be driven directly from a PC computer's VGA output connector. OSD (on screen display) controls allow easy adjustment.  The EarthVision/ADC2 is available preconfigured in kit form with various TFT LCD's at a discounted price. With the on board optional touch controller the EV-AD2 allows for making low cost resistive touch monitors.

 

 

Features:

• Accepts standard Analog RGB signals (15 pin  D-Sub Conn).

• Supports resolutions from VGA to XGA .

• Automatic image scaling and contrast enhancement.

• Automatically synchronizes to most industry standard modes.

• On screen display for fine tuning color and alignment.

• Supports  wide variety of LCD Panels

 

Specifications:

• Analog RGB with H-Sync and V-Sync.

• 15 P D-Sub HD Female  

• RGB Signal: 0.7 Vp-p at 75 W

• TTL level

• 640 X 480  to 1024 X 768 85Hz Resolution

• 6 or 8 Bits / Color max

• Image alignment, Color,  brightness, contrast adjustments

• 3.3V Logic

• 2 MM dual row headers

• 6 B/C or  8 B/C, 1PPC or 2PPC Panel support type

• 12V DC to 24V DC @ 1.5A Typical Power

• 5° to 50 °C operating temperature

• -10° to 65°C storage temperature

 • 5% to 95 % non-condensing relative humidity

• 5.5” X 4.5” external dimension

• Optional Features: Touch Screen controller, analog resistive 4 or 8 wire, Dynapro compatible

• 1 Year warranty

 

LCDs Supported:

• Sharp LQ10Dxxx, xxx=321,367,421

• LQ12xxx, LQ15Xxxx

• GoldStar LCA4VEO2, LT104V1
 • Monochrome

**Buy this controller in a kit with a 10.4", 12.1", 13.3", or 15.1" TFT

 

 

 

This controller contains the ZAN1 chip from Genesis Micro The Zan Chip Overview
CNT-EV-AD2 $249.00
CNT-EV-AD2T  With integrated touch $279.00

 

This controller is available separately configured specifically configured for most popular industrial TFT LCD's. Packaging design is also available. Please contact tris@earthlcd.com  with your request with your LCD panel part #.

AD2 also has the capability to adjust the LCD brightness with a potentiometer connected to the inverter. Ask us for details .

 

Don't see what you are looking for?

 

 

All LCD Monitors

All LCD Kits

 Can't find what you're looking for? report a broken link